9
EHTP22
Getting Started . . .
Open ames in the work area, around the equipment and in the vicinity
of ammable materials are prohibited!
Do not smoke in the work area, around the equipment and in the
vicinity of ammable materials!
Risk of re/ammable materials.
Hot surface, do not touch! High temperatures on the equipment’s
surfaces and structural parts that could cause burns, if they are touched.
The equipment can also stay hot for a longer period of time after the
operation!
Petrol engines produce toxic carbon monoxide exhaust fumes.
Breathing carbon monoxide can cause nausea, fainting or even death.
Do not operate the engine indoors!
Stop the engine before refuelling. Never refuel the equipment while
the engine is running.
Only refuel unleaded petrol and oil mixture in ratio 40:1. Do not use
any other mixture ratio.
Stop the engine and disconnect the spark plug connector before
assembly, cleaning, adjustments, maintenance, storage and
transportation.
Blades are sharp. Risk of cuts. Keep ngers away from the moving
cutting device.
Push the rear handle adjustment lever to adjust the angle of the rear
handle.
Press the primer 7 times until the fuel is visible in the fuel line before
starting the cold engine.
Choke – CLOSE position.
Choke – OPEN position.
Safety information
To Next Page
Loading...
