22
4.2 Processing limitation
Frequent processing can damage this product. Observe the safe-
ty instructions for checking the product. With visible damage or
functional impairment, the product may no longer be used.
4.3 Dismantling
1. First disconnect the cable from the neutral electrode! Do not
damage the cable insulation in the process.
4.4 Required aids
4.5 Precleaning
Use water for precleaning, a non-fixing disinfectant if necessary.
1. Remove surface contaminants with a soft brush/cloth while
holding the product in a water bath and/or rinsing the prod-
uct under running water.
Processing step Items Needed
Precleaning Soft plastic brush/soft cloth
Manual cleaning/
disinfection
Soft plastic brush/soft disposable cloth
(low particle)
Compressed air gun (2 bar maximum)
OBJ_DOKU-197684-002.fm Seite 22 Dienstag, 8. September 2020 9:57 09
To Next Page
Loading...