ErGear EGTS5B - Page 5

Tools Needed (Not lncluded)
Supplied Parts and Hardware
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware for Step 2
Warning: This product contains small items that could be a choking
hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. lf you require replacement parts, please
contact our customer service at support@ergear.com.
• Please note: Not all hardware included in this package will be used.
Phillips
Screwdriver
x2
A
Bolt
M6x10mm
x3
C
Bolt
M6x20mm
(x1) 02 (x1) 01
(x1) 10
(x1) 05
(x1) 06
(x1) 07 (x1) 08
(x1) 03
(x1) 09
(x1) 04
Base
Grommet Bolt
Grommet Plate
C-Clamp
Foot Pad
Locking Plate Knob
Pole
C-Clamp Brace Cable Cover
Electric Drill
(Optional)
Drill Bit
(Optional)
7/16 in (11mm) - 55/64 in (22mm)
5/32 in (4mm)
Small Allen Key
x1
D
01 02 03 04 05 06 07
08
09 10 11 12 13
14 15 16 17
18 19
20 21 22 23 24 25 26
27 28 29 30
31 32
33 34 35 36 37 38 39
40 41 42 43
44 45
46 47 48 49 50 51 52
53 54 55 56
57 58
59 60 61 62 63 64 65