ergoline AFFINITY Series User Manual

24
Environmental protection
information
Please read and observe ...
Installation site
The tanning device must be installed on a flat, even surface.
When setting up Profi tanning devices up to 450 kg, you must ensure that
floors and ceilings in areas used for industrial purposes are designed for
a loading of 1500 N/m
2
.
The load bearing capability of ceilings with wooden joists must be dem-
onstrated in detail.
Tools and outfitting
The following tools are required for the dismantling / assembly work:
– Cross-headed screwdriver 2
– Double ended SW 17 and 13 mm
– 4 mm Allen-key (Ergoline key 84500, 83828)
– Canopy bag (190000130)
– Support aid rear wall (701529)
– Lengthening piece (15720613)

ergoline AFFINITY Series Specifications

General

Model	AFFINITY Series
Category	Tanning Beds
Number of lamps	Varies by model
Total power	Varies by model
Lamps	Varies by model
Facial Tanners	Yes
Cooling	Body ventilation, facial ventilation
Sound System	Optional
Shoulder Tanner	Yes
Cooling System	Body ventilation
Timer	Digital timer