Montage
Assembly
63
– Plug in the IR interface into the foot of sun-
bed as shown in the illustration.
– Reconnect the plug at the foot of the sun-
bed.
– Die Rändelschrauben, mit denen die Front-
blende gehalten wird, wieder befestigen.
– Retighten the 2 knurled thumb-screws that
hold the front panel in place.
– Halteblech festschrauben.
– Retighten the screw in the support.
Note:
The IR interface will only work if the
plug has been fitted correctly.
2 3 4
To Next Page
Loading...
