ergoline ESSENCE 440 SMART POWER 200 User Manual

Operation
30
4.7.1 Navigation
The device is operated with the navigation ring.
Switch on UV lamps:
y Tip the button once.
Switch off UV lamps/pause tanning:
y Hold the button.
Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the tanning device. After selecting a function,
the respective diodes and the navigation ring flash for a few seconds. Settings
can be changed during this time.

ergoline ESSENCE 440 SMART POWER 200 Specifications

General

Brand	ergoline
Model	ESSENCE 440 SMART POWER 200
Category	Personal Care Products
Language	English