Operation
32
4.10 Connect MP3 player
DANGER!
Danger of hearing damage!
Using earphones or headphones at high volume can result
in permanent hearing damage.
– Do not set the volume too high.
The user can connect their own private MP3 player to the tanning device, if
the 'Sound system' accessory is fitted.
1. Mat.-No. 1001855-.. provided for use by the studio operator
(1.5 m / 2 x 3.5 mm stereo jack plug).
2. MP3 player connection: see the documentation from the manufacturer of
the MP3 player.
Connecting:
– Insert the MP3 cable (stereo jack plug) into the sound system.
– Plug the MP3 cable into the MP3 player.
– Select the music title and then start.
WARNING!
The heat might damage your MP3 player!
– Do not place the player directly in the radiation area.
The cable might crack, the connectors might be damaged.
– Do not pull on the cable when unplugging the MP3 player.
To Next Page
Loading...
