Safety notices
03/2014 1008463-01 Operating instructions – 11/28
3.3 Instructions pertaining to a risk of
damage to the machine
CAUTION!
Danger of overheating by obstruction of the air routing.
– Do not change, obstruct or block the air inflow and
outflow area to the device or make any unauthorized
changes to the device. The manufacturer shall bear
no liability for damage or injuries resulting from such
actions.
– Before putting a tanning device into operation, the
transport pallet must be removed from under the de-
vice. Danger of overheating by obstruction of the air
routing.
To Next Page
Loading...
Need help?
General
