Cleaning and maintenance
03/2014 1008463-01 Operating instructions – 17/28
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the cool-down time
for the main fan has finished).
6.2 Maintenance plan
Component Interval Activity See
Chap.
1)
500 h
750 h
1000 h
1500 h
3000 h
1 UV high pressure
lamps
X Replace 4.11
2 UV low pressure
lamps, base
X Replace 4.10
4 UV low pressure
lamps, canopy
X Replace 4.11
2 Starter, UV low
pressure lamps,
base
X Replace 4.10
4 Starter, UV low
pressure lamps,
canopy
X Replace 4.11
3 Acrylic panel X Replace 4.5.1
1 Filter panels (UV
high pressure
lamps)
X Replace 4.11
1) See Operating Instructions Part I (1006322)