Description
28/64
2.5 Functional description
The primary technical components of a tanning device are an artificial source
of UV radiation, a variety of filters and reflectors as well as a mechanical
structure with a defined active surface.
Different tanning results can be achieved in varying strength tanning devices.
On one hand, this is due to the different strength UV lamps and, on the other
hand, the different UV-A and UV-B proportions of the UV radiation. Whereas
the UV-A proportion primarily generates a superficial tan, which appears rap-
idly and is intensive but also fades more rapidly, the UV-B radiation is primari-
ly responsible for more long-term tanning results. The disadvantage of the
UV-B radiation is that the tan does not become visible until one or two days
after visiting the tanning salon. Therefore, the appropriate tanning device is to
be selected depending on the desired tanning goal.
The tanning devices described here exclusively emit UV-A radiation.
2.6 Description: vibration programmes
Programme
1)
Procedure Frequency
Loosening and
relaxing the mus-
cles
Low oscillating fre-
quency
Fitness programme
for newcomers
Medium oscillating
frequency
Fitness programme
for advanced cus-
tomers
High oscillating fre-
quency
Improving the skin
texture and guard-
ing against cellu-
lites
Alternating oscillat-
ing frequency
1)
Each programme starts with a warm-up phase and ends with a cooling-
down phase.
To Next Page
Loading...
Need help?
General
