Operation
07/2016 1016256-00B Operating instructions – 33/64
3.4.1 Navigation
The unit is operated with the navigation ring.
Switch tanning / vibration on and off, pause:
Press briefly: Vibration plate will be switched off
Press and hold down: Vibration plate and UV-lamps
will be switched off
Select device function (go to pictogram)
e.g. Vibra Shape
Select sub-function (if available)
Change setting
Pictograms of available functions are illuminated in default mode after starting
upthe tanning device. After selecting a function, the corresponding pictogram
andthe navigation ring flash for a short time. During this time settings may
bechanged.
Operation – Demonstration mode
–
press until
The audio functions and Vibra Shape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
To Next Page
Loading...
Need help?
General
