Ericsson Dialog 3213 - Programming a Function Key

97BusinessPhone – Dialog 4223 Professional / Dialog 3213
Settings
Program a function
How to program a function on key A.
Note: Some functions can also be programmed as
Individual Abbreviated Numbers, see section “Abbreviated
Numbers” on page 27.
prog Press (see display).
key Press (see display).
_AÔ Press the desired programmable key.
change Press (see display).
forward Select Function code (see display).
See section “Function codes and required data” on page 99.
enter Press (see display).
z Enter associated number.
See section “Function codes and required data” on page 99.
store Press (see display).
Continue with section Select Ringing Character.
Or:
í Press to finish programming.
After approximately 10 seconds, the Function key is active.