Ericsson DIALOG - Page 15

Fig. 18 The grip at the rear of Dialog
14
Fig. 19 This is the way to carry Dialog
In this way the switching equipment of the exchange is not unnec-
essarily occupied, nor the instrument put out of order , by the
cradle-switch springset not returning to home position.
Under the handset at the rear of the instrument, there is a grip
(fig. 18-19). By inserting the fingers in this pocket and gripping
the handset with the thumb at the same time, the instrument can
easily be carried. The screw for fastening the instrument case
is located inside this grip.
Fig. 20
The sub-
scriber
number
frame
' 1
s
. q 0
The front of the instrument is provided with a frame (fig. 20) for
fastening the subscriber number card. This frame is held in
position by means of a spring inside the case, allowing the sub-
scriber number card to be easily inserted without any removing
of the ca sing.
Fig. 21
The trans-
parent
inset
TCI Library www.telephonecollectors.info