Ericsson DIALOG - Page 30

Fig. 48
Wall type
Fig. 47
Depress
the ringer
slightly
before the
transmis-
sion unit
is inserted
in its slots
in the base
plate
When mounting the case, put a screw-driver on the screw and
DE PRESS the transparent inset until the screw fits into the
threaded hole. Then tighten the screw.
This brief account shows how simply the Dialog can be dismantled
and reassembled.
Figo 49
Insert a pointed object , such as a paper clip in the small hole at
the side of the cord inlet (fig. 49).
The case can now be lifted off. (fig. 50).
To
dismantle the instrument further one of the dial supports is
pressed outwards and eased slightly upwards (fig. 51).
Once this support is free of the base plate the other support can
be removed in the same way.
(The dial can be released by being pulled upwards and by removing
the connections with a screw- driver).
29
TCI Library www.telephonecollectors.info