GH688,GA628, Standard Electrical Repairs
4/00021-2/FEA 209 544/1.G 9 (112)
Fig. 2.3
Measure the resistance of C853 (class B, >100 kohms, fig. 2.4).
Fig. 2.4
Give the board power and start it up.
Measure VVCO (~3.8V) at V451 pad 3 and VRAD (~3.8V) at C457 (fig. 2.5).
• If any of the voltages are incorrect, proceed to chapter 3 (“Doesn´t start”-fault).
To Next Page
Loading...
