Erasing a Stored Number (and Name)
A previously stored phone number (and name) will be
erased automatically if you store a new number in the same
memory location.
However, you can erase a number without replacing it with
a new number, by proceeding as follows:
1. If there is anything showing in the numeric field of
the display, erase it with the C key.
2. Press S. ‘‘ERASE’’ is displayed.
3a. Enter the memory location number (one or two
digits) and go to step 4, or
3b. Press S. ‘‘NAME?’’ is displayed. Enter the name
stored with the phone number.
4. Press S again. ‘‘ERASED’’ is displayed. The
number (and name) is erased.
Storing Numbers
21
To Next Page
Loading...
