RBS 2308 and RBS 2309 User’s Guide
5.4.14 Installing the Int
egral Sector Antenna (If A pplicable)
This section descr
ibes how to install a Sector Antenna on the RRU.
1. Attach the Sector Antenna on the front of the RRU. Secure it with four
screws.
P011293A
Figure 29 Installing the Sector Antenna
5.4.15 Connecting RBS Antenna Cables
This section describes how to connect antenna cables w hen an MCB is not
used.
Integral Sector Antenna
1.
Connect the RBS antenna cables to connection ports TX(/RX) 1 and
TX(/RX) 2, and tighten with the appropriate torque wrench. See Table
14 on page 43.
P010579B
Figure 30 RBS Antenna Cable Connections
78
EN/LZT 720 0027 Uen R8A 2006-06-27
To Next Page
Loading...