RBS 2308 and RBS 2309 User’s Guide
2. Mount the Omni Antenna bracket on top of the RRU, and tighten the
captive s crews.
3. Install the RRU earthing cable.
P011410A
Figure 27 Mounting the Antenna Bracket
4. Attach the antenna on the bracket. Use the two captive screws on each
side of the antenna.
5. Route and fasten the antenna cable with two clamps on the right side of
the RRU.
6. Secure the antenna with the sunshield, see Section 5.4.17 on page 82.
P011294B
Figure 28 Installing the Omni Antenna
7
7
EN
/LZT 720 0027 Uen R8 A 2 006-06-27
To Next Page
Loading...