11
Route the wiring out of the way and down the back of the
dashboard.
3
RAM
RAM
F
NOTE: Do not reuse the nylon-insert lock nuts (nyloc) if swapping
the mounting option; use unused nuts (supplied).
Attach the Ehubo to the mount using screws and washers
(F). Use of the washers is essential to reliably secure the
device!
2
SUCTION CUP MOUNT
• Clean the windshield surface with the alcohol wipe (A)
• Fit the composite diamond base on the suction cup base
using the supplied screws.
1C
M
To Next Page
Loading...
