Erreka ADB30 - User Manual

5
VIVO-D103 / ADB30
Quick installation and programming guide English
WARNING
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The most recent version of this guide and the
installation manual are available at the "Downloads" section on Erreka's website:
http://www.erreka-automation.com
The options and functions described in this guide apply for the firmware version indicated on the circuit. The
firmware, as part of a process of continuous improvement, is subject to new functionalities or upgrades being
included as a result of new versions which are not necessarily compatible with previous ones. For this reason,
some options or functions may differ or be unavailable if your firmware is older than shown in this guide.
Elements of the complete installation
Electrical wiring
A: Main power supply
B/G: Flashing light with antenna
C: Photocells (mirror)
D: Pushbutton or key switch
E: Operator (motor + limit switches)
F: Operator release
V2.0 or later

Summary

Elements of the Complete Installation

General Connections and Components

LEDs and Fuses Overview

Identifies LEDs and fuses on the control board and their functions, crucial for diagnostics and protection.

Limit Switch Adjustment and Direction Check

Guides on adjusting limit switches and verifying motor turning direction using pushbuttons.

Programming and Configuration

SW2 Functions for Programming

Explains how to use SW2 (DIP3 ON) to enable programming mode for the operator.

Total Travel Programming

Provides a step-by-step guide for programming the complete opening and closing travel of the gate.

Operator Settings and Modes

Operation Mode Selection

Details on selecting various gate operation modes using SW2 (DIP3 OFF) settings.

Jumpers and Potentiometers Setup

Instructions for setting jumpers (J1) and adjusting potentiometers (PM.A, PM.C, TE) for operator configuration.

Erreka ADB30 Specifications

General

Brand	Erreka
Model	ADB30
Category	Control Unit
Language	English