Need help?Do you have a question about the Erreka ERTAIN 4 SYSTEM and is the answer not in the manual?
Measure gap dimensions: clearance height (H) and total width (B).
Steps for installing the support profile on walls or lintels.
How to position the carriers on the rail using an Allen wrench.
Instructions for attaching the fixed leaves according to profile manual.
Securing leading edge brackets to sliding leaves with screws.
Securing leading edges on carriages with M6x16 Allen screws.
Adjusting leaf depth using a wrench to be parallel to the box profile.
Positioning and securing the ground guide for the sliding leaf.
Adjusting leaf height via the central screw of the carriage.
Installing limit switches on the rail for blade movement.
Advisable to insert peripheral wiring before motorization for easier connection.
Fixing separating nuts and attaching arms to carriers for sliding leaves.
Steps for positioning and securing the motorized profile to the support profile.
Steps for fitting, tensing, and securing the drive belt.
Securing brackets to arms by adjusting countersunk screws.
Placing and securing cover positioner brackets in the cover profile.
Drilling holes and attaching the cover profile to side covers.
Instructions for assembling and manually unlocking the electrolock.
Detailed list and specification of control board terminals.
Diagram illustrating peripheral connections to the control board.
Description of six different operational states for the door.
Accessing and adjusting basic parameters like door open time and speed.
Accessing advanced parameters for technical service and configuration.
Guidelines for regular maintenance of automatic door installations.
Details of the 12-month warranty and exclusions.
General| Number of Doors Supported | 4 |
|---|---|
| Power Supply | 12VDC |
| Category | Access Control |
| Communication Interface | RS-485 |
| Operating Temperature | -10°C to +50°C |
| Humidity Range | 10% to 90% |
To Next Page
