To Next PageTo Next Page
Need help?Do you have a question about the Erreka AZIMUT and is the answer not in the manual?
Ensures automation adheres to essential European safety regulations and directives like Machinery Directive.
Details on how to assemble and install the guide section bar, including chain tensioning.
Instructions for mounting the motor unit onto the section bar using specific brackets and screws.
Procedure to configure the fully open position of the garage door using the control panel.
Procedure to configure the fully closed position of the garage door using the control panel.
Automated process to calibrate the motor's force based on door resistance and movement.
Configures the obstacle detection sensitivity, allowing adjustments for increased or decreased response.
Option to choose between Fixed Code or Roller Code for remote control compatibility.
Enables an audible alarm when the door remains open for an extended period.
Configures the system to automatically close the door after a set delay period.
Activates an alert for scheduled maintenance based on operational cycles.
Selects the operational mode for door opening and closing commands.
Finalizes and stores all programmed parameters, exiting the setup menu.
General| Brand | Erreka |
|---|---|
| Model | AZIMUT |
| Category | Controller |
| Language | English |
