Need help?Do you have a question about the ESAB OrigoArc 200 and is the answer not in the manual?
Detailed list of components used in the wiring diagram.
Explains the function of the power supply board and its circuits.
Describes the power module, converter, and gate circuits.
Details the secondary board components and their functions.
Procedure and equipment for soft-starting the machine.
Steps to test diodes on the secondary board.
Detailed list of components used in the wiring diagram.
Explains the function of the power supply board and its circuits.
Describes the power module, converter, and gate circuits.
Details the secondary board components and their functions.
Procedure and equipment for soft-starting the machine.
Steps to test diodes on the secondary board.
General| Fuse | 16 A |
|---|---|
| Electrode Size | 1.6-4.0 mm |
| Protection Class | IP23S |
| Insulation Class | F |
| Power Supply Frequency | 50/60 Hz |
| Efficiency | 85% |
| Input Voltage | 230 V |
| Welding Processes | MMA |
To Next Page