Certification and Control labels
The SENTINEL™ A60 conforms to PPE Regulation 2016/425/EU, Regulations (EU) 2016 as brought into
UK law and amended and harmonized/designated standard EN 166:2001, EN 175:1997 and
EN379:2003+A1:2009. Approved body for UK certification: SGS United Kingdom Limited, Rossmore
Business Park, Ellesmere Port South Wirral Cheshire, CH65 3EN notifed body no. 0120. Notified body for
CE Certification: ECS GmbH, Huettfeldstrasse 50 / Obere Bahnstrasse 74, 73430 AALEN / 73431 AALEN
GERMANY that provides approval and continual quality system under the control of the European
Commission, the German Ministry for Work and the Central Office of the Provinces.
The shell and the auto darkening filter are marked accordingly. Classification for eye and face protection is
following EN379, EN175, EN166.
We are therefore allowed to use the following marks:
ADF Marking Explanation:
Welding Helmet Marking Explanation:
Front/Inside Cover Lens Explanation:
ESAB 1 B CE UKCA
ESAB -Manufacturer’s identification
1 = optical class
B - Resistance against medium energy impact (120m/s)
CE - European conformity
UKCA - UK conformity
3/5-9/9-13 ESAB 1/1/1/1/379 CE UKCA
3 - Light state scale number
5-9 /9-13 -Dark state scale number
ESAB - Manufacture’s name
1 – Optical class
1 – Diffusion of light class
1 – Variation in luminous transmittance class
1 – Angle dependence of luminous transmittance class
379 – Number of the standard
16321 ESAB W3/5-9/9-13 V1
16321 - Number of the ISO standard
ESAB - Manufacture’s name
3 - Light state scale number
5-9 /9-13 - Dark state scale number
V1 - Angle dependence of luminous transmittance class
To Next Page
Loading...
Need help?
General
