Esatto EVD700W - Cleaning & Maintenance; Cleaning and Care; Cleaning Your Dryer; Cleaning the Door Filter

User Manual
16
Clening  Mintennce
CLEANING AND CARE
WARNING!
• Disconnect the power cord before cleaning.
• Clean the dryer with a clean damp cloth only.
• Do not use solvents, abrasive cleaners, glass cleaners or all-purpose
cleaners.
These could damage plastic surfaces and other parts.
• Do not rinse water over the machine directly.
CLEANING YOUR DRYER
• Prepare a clean damp cloth using clean water.
• Clean the door, especially the inside window.
• Clean the seal around the door opening.
• Take out the lter, clean the sealing and air ow openings.
• Before starting the dryer, dry all parts with a soft cloth.
CLEANING THE DOOR FILTER
Make sure you clean the door lter after each cycle.
1. Open the door.
2. Take out the door lter by pulling it straight up.
3. Open the lter and remove the lint on the lter.
You can use water, a cloth or your hands to help clean it.
4. If the lter is cleaned by a damp cloth or water, please ensure that the lter is thoroughly dried
before reinstalling it.
WARNING!
• The u accumulated on the lter will block the air circulation.
Not cleaning the lter regularly will increase drying time and energy consumption.
• Disconnect the power cord before cleaning!
• Do not operate the dryer without the lter!
15
Filter clean
•
•
•
Clean the lint filter after each use.
Remove the filter by pulling it straight up.
Filter cleaning
Use a wiping cloth or your hands to remove lint.
Install filter
If the filter is cleaned by damp cloth
or water, please dry thoroughly before installation.
Cleaning cabinet and drum
WARNING!
• Disconnect the power cord before cleaning!
• Clean the dryer with a wet cloth which is
only damped by clean water.
• Do not rinse water over the machine directly.
• Do not use solvents, abrasive cleaners, glass
cleaners or all-purpose cleaners. These could
damage plastic surfaces and other parts.
• Before starting the dryer, dry all parts with a soft cloth.
MAINTENANCE
Cleaning and Care
15
Filter clean
•
•
•
Clean the lint filter after each use.
Remove the filter by pulling it straight up.
Filter cleaning
Use a wiping cloth or your hands to remove lint.
Install filter
If the filter is cleaned by damp cloth
or water, please dry thoroughly before installation.
Cleaning cabinet and drum
WARNING!
• Disconnect the power cord before cleaning!
• Clean the dryer with a wet cloth which is
only damped by clean water.
• Do not rinse water over the machine directly.
• Do not use solvents, abrasive cleaners, glass
cleaners or all-purpose cleaners. These could
damage plastic surfaces and other parts.
• Before starting the dryer, dry all parts with a soft cloth.
MAINTENANCE
Cleaning and Care