36
Using BIOS
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave the
items on this page at their default values unless you are very familiar with the technical
specifications of your system hardware. If you change the values incorrectly, you may
introduce fatal errors or recurring instability into your system.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Advanced Chipset Features
Item Help
Menu Level
Onboard GPU [Enable If No Ext GPU]
Frame Buffer Size [64M]
GPU Bank Flip [Disabled]
PMU [Disabled]
CPU Frequency [200.0]
K8<->NB HT Speed [Auto]
K8<->NB HT Width [Auto]
DRAM Configuration [Press Enter]
PCIE Spread Spectrum [Disabled]
SATA Spread Spectrum [Disabled]
HT Spread Spectrum [Disabled]
PCIE Clock [100Mhz]
SSE/SSE2 Instructions [Enabled]
TPM Control [No Change]
System BIOS Cacheable [Disabled]
Frame Buffer Size (64M)
This item enables users to specify the Onboard VGA share memory size.
GPU Bank Flip (Disabled)
This item enables or disables GPU Bank flip.
PMU (Disabled)
This item enables or disables ACPI power management unit function.
Onboard GPU (Enable If No Ext GPU)
This item enables the onboard GPU function. Disable this item if you are going to install an
external GPU.
CPU Frequency (200.0)
This item enables users to manually over-clock the CPU frequency, ranging from 200.0
to 300.0.
K8 NB HT Speed (Auto)
This item enables users to set the speed of HyperTransport between the CPU and Northbridge.
K8 <-> NB HT Width (Auto )
This item enables users to set the HyperTransport width between CPU and the Northbridge
.
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
To Next Page
