Escea D Series - Page 7

7
C TIMER OPERATION
Timers are only created by using the Escea Smartheat APP and then are stored on the re. The re needs to be
connected to the Internet for the mers to operate because the re needs to be able to access and understand
'local me'.
Note : Please use Escea Smartheat user guide 'secon K' to setup on/o mers.
D AUXILIARY ON/OFF BUTTON
The D-Series has an auxiliary start for the re. This starts the re in MED speed.
Note: Ensure the appliance has cooled down before touching the auxiliary buon to avoid coming into contact
with hot surfaces.
DS - Series
DF - Series