Escea DF960 - Basic Operation; Activating the Remote; Charging the Remote; Initial Start

5
B BASIC OPERATION
B1 
The remote arrives in a locked shipping state. To unlock it, please plug it into power via the USB-C port for 1
second.
Note: The remote does not come with a charging cable.
B2 Charging the Remote
Charge the remote through the USB-C port in the boom of the remote using a USB-C cable. The remote can’t
be used while it is charging. The baery icon will “ll up” and turn green once it is fully charged.
B3 
To turn the re on, press the “POWER” ( ) buon once, and within a few seconds the appliance will begin its
startup sequence.
Note: Before starng up, the appliance has a 15 to 30-second pre-ignion purge. During this me, a fan runs
by itself before aempng to ignite. A visual indicator on the top of the remote screen shows which part of the
startup process the appliance is in (see above).