What to do if my Esco Provocell Laboratory Equipment has no display when the power is on?
If your Esco Laboratory Equipment shows no display when powered on, first ensure the power cord is properly connected. If the connection is secure, check the fuse and replace it if faulty (250V 3A ?5x20). Also, the switch could be damaged, in which case it should be replaced.
What to do if mixing stops in my Esco Provocell?
If mixing stops in your Esco Laboratory Equipment, the drive might be faulty, requiring you to contact the supplier of manufacturer. Also, check the fuse and replace it if damaged (250V 3A ?5x20).
General| Shelving | Adjustable stainless steel shelves |
|---|---|
| Chamber Material | Stainless steel |
| Humidity Uniformity | ±3% RH |
| Power Supply | 220-240V, 50/60Hz |
| Humidity Range | Up to 95% RH |
| CO2 Sensor Type | Infrared (IR) sensor |
| CO2 Uniformity | ±0.1% |
| Controller Type | Microprocessor-based PID controller |
| Construction | Double-walled, insulated |
| O2 Range | 1% to 21% |
Ensures the instrument is properly grounded to prevent electric shock.
Advises against opening the instrument; service by qualified personnel only.
Check voltage and plug compliance before powering on the instrument.
Specifies environmental conditions and minimum clearance for optimal operation.
Cautionary notice regarding hot parts of the instrument during operation.
Guidance on cleaning and using accessories for instrument maintenance.
Information about the 24-month warranty against defects.
Conditions under which the warranty is not applicable.
Specifies environmental conditions and power supply requirements for normal use.
Details temperature and humidity limits for transport and storage.
Lists model specifications, block options, dimensions, and weight.
Technical performance metrics including temperature range, speed, and accuracy.
Overview of the instrument's physical structure and components.
Detailed explanation of the instrument's display and readouts.
Explanation of the instrument's buttons and their operational functions.
Step-by-step instructions for safely powering on the instrument.
Guide for setting temperature, mixing time, and orbital speed parameters.
Instructions on how to activate and use the instant mixing mode.
Detailed steps for calibrating and correcting temperature discrepancies.
Configuration settings for instrument alarms and keyboard beeps.
To Next Page
