Escort ELC-131D - Special Indication Characters

“Special Indication Characters | ss Section i
C-+ : Indicates short connectors
[Fn
:
Indicates
open
connectors
Safety
Information
This
manual
contains
information
and
warnings
which
must
be
followed
to
ensure
safe
operation
as
well
as
to
maintain
the
meter
in
a
safe
condition.
PAL — : Indicates parallel mode
Er + Indicates series mode
e This meter is for indoor use, altitude up to 2,000 m.
e
The
meter
is
safety-certified
in
compliance
with
EN61010(IEC
1010-1)
Installation
Category
I
50V,
Pollution
Degree
2
environment,
e
Use
the
meter
only
as
specified
in
this
manual.
Otherwise,
the
protection
provided
by
the
meter
may
be
impaired.
e The power for the meter is supplied by a single standard 9V
battery. But also a line operation is possible using a 12V AC
to DC adaptor. If a power adaptor is selected, please be sure to
use with the one which fulfilled the safety requirements of a
relevant IEC standard.
rA! : Indicates calibration mode
FUSE : Indicates damaged or open fuse
*Note:
The
CPU
of
the
meter
can
self-detect
if
its
fuse
is
either
open
or
damaged.
In
this
case,
the
LCD
will
display
the
symbol
“
FiSE”
and
an
audible
beep
will
sounds
continuously,
warning
the
user
to
replace
the
old
fuse
to
maintain
the
accuracy
of
measurement.
While
replacing
the
fuse, the power of the meter must be completely shut off.