Settings & Preferences
Press and hold the MRK and SEN buttons to access Preferences. To exit Preferences, simply wait a few
seconds without pressing a button. The unit will display Completed to conrm your selections.
Press MRK to go
from one category Press VOLUME + or – to change
to the next your setting within a category
User Mode Advanced* Access and customize all Settings and Preferences
Novice Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to advanced mode to view all Preferences.
Pilot Scan Bar* Scanning Bar with Full Word.
Full Word Full Word: Auto, Auto NoX, AutoLoK or Highway
Display Color Blue*/Green/Red/Amber Set color to match your vehicle’s dash display
Speed Display On* Displays current speed
O Displays battery voltage
Cruise Alert 20 mph* Oers double beep alert tones below specied speed
O / 20-160 mph
Over Speed 70 mph* Reminds you when you exceed a specied speed
O / 20-160 mph
Over Speed Limit Speed Limit*
Reminds you when you reach a specied speed at or over the speed limit
O /Speed Limit/5 Over/
7 Over/10 Over/15 Over/20 Over/25 Over
Meter Mode Standard* Single band with signal strength bar graph
Spec Single band with numeric frequency
Expert Multiple bands with signal strength bar graphs
Simple Simple messages replace bands:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones Standard* Standard ESCORT alert tones
Mild Mild doorbell chime alert tones
AutoMute AutoMute Low / Automatically reduces audio to preferred volume
Med* / High / O during alert
AutoLearn On* / O Automatically stores and locks out false alarms
Units English* / Metric Units for distance and speed
Language English* / Espanol Language for voice and text
Voice On* / O Voice announcements
GPS Filter On* / O Enables GPS-powered features
7