Escort iXc - Advanced Settings and Updates; AutoPower and Band Enable Configuration; Connectivity, Marker, and Update Settings

Settings & Preferences
AutoPower O Power turns on or o depending on your vehicle’s ignition
type (constant power or switched)
1 Hour Powers o automatically after 1 hour
2 Hours Powers o automatically after 2 hours
4 Hours* Powers o automatically after 4 hours
8 Hours Powers o automatically after 8 hours
NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. Display screen will turn on automatically after you reach 10MPH.
Band Enables Default* Default Settings
Modied Band Enables have been modied from their default settings
Press SEN to go from one Press VOLUME + or – to change
band category to the next your setting within a category
X Band On* / O
K Band On* / O Freq: 24.050 – 24.250 GHz
NOTE: When K Band is o, you can select separate segments of the band to turn on or o.
KN1 On* / O Freq: 24.050 - 24.110 GHz
KN2 On* / O Freq: 24.110 - 24.175 GHz
KN3 On* / O Freq: 24.175 - 24.250 GHz
KN4 On / O* Freq: 23.950 - 24.050 GHz
Ka Band On/ O* Freq: 33.400-36.000 Ghz
NOTE: When Ka Band is o, you can select separate segments of the band to turn on and o.
KaN1 On / O* Freq: 33.400 - 33.700 GHz KaN6 On / O* Freq: 34.800 - 35.160 GHz
KaN2 On* /O Freq: 33.700 - 33.900 GHz KaN7 On / O* Freq: 35.160 - 35.400 GHz
KaN3 On / O* Freq: 33.900 - 34.200 GHz KaN8 On* / O Freq: 35.400 - 35.600 GHz
KaN4 On / O* Freq: 34.200 - 34.600 GHz KaN9 On / O* Freq: 35.600 - 35.840 GHz
KaN5 On* / O Freq: 34.600 - 34.800 GHz KaN10 On / O* Freq: 35.840 - 36.000 GHz
Ka-POP On / O*
Laser On* / O
TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms
RDR On / O* Radar Detector Rejection
Marker Enables Default* Default Settings
Modied Marker Enables have been modied from their default settings
Wi-Fi On* /O Turns Wi-Fi Connect on or o
Bluetooth On* / O Turns Bluetooth on or o
Auto Update O/Defender/ Automatically checks for selected updates when detector is
Software/All* powered on
Perform Update Defender Defender update. Press SEN to conrm
Software Perform Software update. Press SEN to conrm
NOTE: AutoPower only works
with constant power ignition.
8