ESI ES2247B User Instructions

14
Temporary Manual Overrides
The Advance Function
The ADVANCE function allows the user to move to the next
ON/OFF programme for a “one off” event, without having to
change the programme or use the ON or OFF buttons.
N.B. The ADVANCE function is only available when the
programme is in AUTO or ALL DAY operating modes and
the slider must be switched to RUN.
To Advance Central Heating
1. Press the Next
button until the radiator symbol
is displayed. Press the ADV button. This will turn the
Central Heating ON if it is in an OFF period and OFF if it
is in an ON period. The word ADV will appear to the left
hand side of the radiator symbol.
2. It will stay in this state until either the button is
pressed again, or until a programmed ON/OFF period
commences.
To Advance Hot Water
1. Press the Next
button until the tap symbol is
displayed. Press the ADV button. This will turn the Hot
Water ON if it is in an OFF period and OFF if it is in an
ON period. The word ADV will appear to the left hand
side of the tap symbol.
2. It will stay in this state until either the ADV button is
pressed again, or until a programmed ON/OFF period
commences.
Operating the unit

ESI ES2247B Specifications

General

Brand	ESI
Model	ES2247B
Category	Programmer
Language	English