54 / EN
Washing Machine / User’s Manual
Problem Reason Soluton
It does not rinse well.
The amount, brand and storage conditions of the
detergent used are inappropriate.
Use a detergent approprate for the washng
machne and your laundry. Keep detergents
closed n an envronment free of humdty and
do not expose them to excessve temperatures.
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Pump filter is clogged. Check the flter.
Drain hose is folded. Check the dran hose.
Laundry became stiff after
washing. (**)
Insufficient amount of detergent is used.
Usng nsuffcent amount of detergent for
the water hardness can cause the laundry to
become stff n tme. Use approprate amount
of detergent accordng to the water hardness.
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Laundry does not smell like the
softener. (**)
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Wash and
clean the dspenser wth hot water. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. Dry the detergent drawer before puttng n
detergent.
Detergent has gotten damp. Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
Water pressure is low. Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
Check the holes and clean f they are clogged.
There is a problem with the detergent drawer valves.
Call the Authorsed Servce Agent.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Regular drum cleaning is not applied. Clean the drum regularly. For ths, please
see 4.4.2.
Too much foam forms in the
machine. (**)
Improper detergents for the washing machine are
being used.
Use detergents approprate for the washng
machne.
Excessive amount of detergent is used. Use only suffcent amount of detergent.
Detergent was stored under improper conditions. Store detergent n a closed and dry locaton.
Do not store n excessvely hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
Use smaller amounts of detergent for ths
type of tem.
Detergent is put in the wrong compartment. Put the detergent n the correct
compartment.
Softener is being taken early. There may be problem n the valves or n the
detergent dspenser. Call the Authorsed
Servce Agent.
Foam is overflowing from the
detergent drawer.
Too much detergent is used.
and pour nto the man wash compartment of
the detergent drawer.
Put detergent nto the machne sutable
for the programmes and maxmum
loads ndcated n the “Programme and
consumpton table”. When you use addtonal
chemcals (stan removers, bleachs and etc),
reduce the amount of detergent.