Eskimo ES 5750 - Appropriate Installation Location; Removing Packaging Reinforcement; Removing the Transportation Locks

Washing Machine / User’s Manual
35 / EN
4.1 Installation
 
 
installation is under customer's responsibility.
 
pinched or crushed while pushing the product into its place after installation or cleaning
procedures.
 

procedures carried out by unauthorised persons.
 
Damaged products cause risks for your safety.
4.1.1 Approprate nstallaton locaton
 
similar surfaces.
 

load carrying capacity!
 
 
 
 
 
them on the product.
4.1.2 Removng packagng renforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by pulling the
ribbon. Do not make this operation alone by yourself.
4.1.3 Removng the transportaton locks
 
2 Remove the transport safety bolts by turning them slightly.
3 Insert the plastic covers in the bag containing the user manual to the openings on the rear
panel.
A
CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the
product will be damaged.
C
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again
in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!