13
English
Available menu items and settings
CONV>*** (Upconversion)
You can convert the sampling frequency of PCM signal, such as
a CD, to 2x or 4x. It is also possible to convert the PCM signal to a
DSD signal.
A different setting can be made for each input.
DF>*** (Digital filter)
Changes the digital filter characteristics when a PCM signal is being
input.
A different setting can be made for each input.
CLK>*** (Clock)
Selects the CLOCK SYNC or master clock mode.
A different setting can be made for each input.
WOUT>*** (clock sync output frequency)
When set to clock sync mode, selects the CLOCK SYNC output
frequency.
A different setting can be made for each input.
OUT>*** (Analog output)
Sets the output connector for analog audio output.
XLR>*** (XLR output gain)
Sets the XLR output gain.
USB>*** (USB input)
Sets the USB operation mode.
RC>*** (Remote control)
If used with an optional Esoteric amplifier, you can set the D-07X
not to respond to the Esoteric remote control.
DISP>*** (Display)
Selects whether the display normally displays the volume level or
the sampling frequency.
FLaOFF>*** (automatic display off)
In order to prevent the fluorescent display from wearing out, you
can set it to turn off automatically after a certain amount of time
passes without operation.
DIMMER>*** (Display dimming)
The display on the main unit can be dimmed to suit the environ-
ment in which you listen to music.
To Next Page
Loading...
