14
Setting mode
1
4
2
3
Changing settings
1 When stopped or during playback, press the MENU
button.
2 Press the MENU button repeatedly to select the item
to change.
Each time you press the MENU button, the item shown on the
display changes.
DIMMER>
3
APS>
3
DPaOFF>
3
DOUT>
3
AOUT>
3
CLK_TH>
UPCONV>
c
FIX>
c
PCMF>
c
DSDF>
c
CLK>
c
CLK_OUT>
o Some items might not be shown depending on the selected
source or operation status.
o CLK_TH will be shown when CLK> is set to IN or MCK.
o CLKOUT will be shown only when CLK> is set to OUT.
o FIX will be shown only when UPCONV> is set to FIX.
o If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume.
3 Use the parameter adjustment (+/−) buttons to
change the settings.
To change multiple items, repeat steps
2
and
3
.
4 Press the INPUT button to complete the setting.
If you do nothing for 10 or more seconds, setting mode will end
and ordinary display will resume.
o Settings are retained even if the power plug is disconnected.
To Next Page
Loading...
General