Need help?Do you have a question about the ESPEC Platinous ESX-2C Series and is the answer not in the manual?
General| Brand | ESPEC |
|---|---|
| Model | Platinous ESX-2C Series |
| Category | Climate chamber |
| Language | English |
Explains standard safety symbols used throughout the manual.
Guide to deciphering the chamber model number and its components.
Lists included accessories and spare parts with their uses.
Lists hazardous substances that must not be introduced into the chamber.
Details safety devices and their settings to protect specimens from damage.
Instructions for safely disposing of the chamber, including door removal.
Covers essential precautions like grounding, air blasts, and specimen handling.
Introduces the Platinous Series chambers and their testing capabilities.
Explains the BTHC system and the role of the SCP-220 controller.
Identifies and describes the main components of the chamber exterior.
Details the components and functions of the instrumentation panel.
Explains the operation of the touchscreen interface and its elements.
Identifies parts within the electrical compartment and their functions.
Identifies parts within the water circuit compartment and their functions.
Outlines site and space requirements for proper chamber installation.
Provides step-by-step instructions for installing and leveling the chamber.
Covers primary power supply requirements and connection procedures for safety.
Details requirements and procedures for connecting water-cooled chambers.
Explains how to set up the drainage system for water removal.
Instructions for checking and adjusting water levels in the humidifying and wick pans.
Details connecting the water supply hose to the humidifying tray circuit.
Covers arranging specimens and installing shelf brackets for optimal testing.
Instructions for setting overheat protectors and alarm limits to protect specimens.
Guide to inputting desired temperature and humidity setpoints for constant mode.
Procedures for starting, stopping, and managing test cycles, including dew prevention.
Explains features like auto/manual refrigeration control, time signals, and alarm terminals.
Provides lists of routine checks and maintenance tasks with their intervals.
Details specific check procedures like trip tests for power and overheat protectors.
Outlines various maintenance tasks such as cleaning condensers, filters, and trays.
Lists consumable parts and their recommended replacement intervals.
Explains how to interpret alarm codes and resolve issues based on the alarm table.
Addresses common operator errors and general troubleshooting for non-alarm issues.
Instructions for user-serviceable tasks like replacing fuses and lamp bulbs.
Details the procedure for defrosting the chamber to remove frost buildup.
Provides detailed technical specifications for different chamber series (ESL, ESU, ESX, ESZ).
Defines technical terms and concepts used within the manual.
Outlines the steps for requesting warranty service and parts.
To Next Page