What to do if the moisture indicator shows purple (pink) in ESPEC PLATINOUS CHAMBER?
If the moisture indicator on your ESPEC Climate chamber is showing purple or pink, it means you should replace the desiccant.
General| Temperature Control Accuracy | ±0.3°C |
|---|---|
| Humidity Control Accuracy | ±2.5%RH |
| Internal Dimensions | Various sizes available |
| Power Supply | AC 200-240V, 50/60Hz |
| Weight | Varies depending on model |
| Controller | Touch panel controller with programmable settings |
Explains the meaning and usage of safety symbols employed in the manual.
Details the purpose, operation, and specifications of the chamber door with a viewing window and light.
Describes the inner glass door option, including its purpose, precautions, and specifications.
Explains the purpose, precautions, and operation of ports for wiring and tubes.
Covers the purpose, precautions, and installation/operation of shelves for test items.
Details the purpose, installation, operation, and maintenance of the dry air purge system.
Explains the purpose of making the chamber comply with Canadian CSA standards.
Describes the purpose and specifications for providing conditioned air to a remote cabinet.
Details the purpose, use, installation, operation, and maintenance of the water supply tank.
Explains the purpose, installation, operation, and maintenance of the de-ionizing cartridge.
Covers the purpose, installation, operation, troubleshooting, and specifications for low humidity control.
Describes the purpose, installation, operation, maintenance, and specifications for extra low humidity.
Details the purpose, operation, maintenance, and replacement parts for Bellcore GR-63 low humidity compliance.
Explains the purpose, operation, maintenance, and specifications of the overcool protector.
Details the purpose, operation, and replacement parts for the emergency stop switch.
Covers the purpose, operation, specifications, and replacement parts for the product thermocouple.
Describes the purpose, operation, and specifications for the product temperature control option.
Details the purpose, performance range, specifications, maintenance, and system of the humidity sensor.
Explains the purpose and specifications for providing additional time (event) signals.
Covers the purpose, operation, and replacement parts for temperature/humidity recorders.
Refers to the SCP-220 Communications Option Manual for interface details.
Refers to the SCP-220 Communications Option Manual for interface details.
Refers to the SCP-220 Web Controller Manual for interface details.
Details the purpose, installation, operation, and specifications of the LN2 gas injector.
Covers the purpose and specifications for observation of refrigeration system operating pressures.
Explains the installation positions of options on the instrument and option panels.
Lists options installed on the instrument panel.
Lists options installed on the option panel.
To Next Page