EasyManua.ls Logo

ESPEC Platinous ESL-4C Series User Manual

Default Icon
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PLATINOUS CHAMBER SERIES
USER’S MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ESPEC Platinous ESL-4C Series and is the answer not in the manual?

ESPEC Platinous ESL-4C Series Specifications

General IconGeneral
BrandESPEC
ModelPlatinous ESL-4C Series
CategoryClimate chamber
LanguageEnglish

Summary

Chapter 1: Introduction

1.1 Safety Symbols

Explains safety symbols indicating danger levels and notes.

Chapter 2: Precautions in Usage

2.1 Prohibited Substances

Lists explosives, flammables, and corrosives not to place inside the chamber.

2.2 Specimen Safety Device Setup

Details safety devices like overheat protectors and alarms for specimen protection.

Chapter 5: Installation

Installation Site and Space Requirements

Outlines criteria for selecting a suitable installation site and required space.

Chamber Installation Procedure

Step-by-step guide for installing the chamber, including leveling and anchoring.

Power Supply Work

Covers power supply requirements, connections, and grounding procedures.

Chapter 6: Operation

Test Preparation

Covers arranging specimens, installing shelves, and preparing for tests.

Specimen Safety Device Setup

Setting up overheat protector and high/low limit alarms for specimen safety.

Constant Temperature Setup

Guides inputting target temperature and humidity for constant mode operation.

Test Startup and End Procedures

Procedures for starting, pausing, and ending tests, including dew prevention.

Chapter 7: Checks and Maintenance

Check and Maintenance Lists

Provides lists of regular checks and maintenance tasks for the chamber.

Chapter 8: Troubleshooting

Troubleshooting Using Alarm Codes

Guides on resolving issues based on displayed alarm codes and an alarm table.

Related product manuals