Need help?Do you have a question about the ESPEC Platinous ESL-3C Series and is the answer not in the manual?
General| Brand | ESPEC |
|---|---|
| Model | Platinous ESL-3C Series |
| Category | Climate chamber |
| Language | English |
Explains safety symbols and their meanings for safe operation.
Guides on how to read model numbers and understand chamber descriptions.
Lists the accessories and spare parts that should be included with the chamber.
Lists explosives, combustibles, and corrosive substances to avoid.
Details setting safety devices to protect specimens from thermal damage.
Covers safe disposal procedures and other general precautions.
Advises on complying with warning labels and provides refrigerant GWP data.
Introduces the Platinous Series and its capabilities for environmental testing.
Explains the BTHC system, its components, and the SCP-220 controller.
Identifies parts of the chamber, including front, rear, and test area components.
Details the instrumentation and operating panels for chamber control and monitoring.
Explains the electrical and water circuit compartments and their contents.
Outlines conditions for selecting an installation site and required clearances.
Provides steps for leveling, moving, and anchoring the chamber.
Details primary power supply requirements, connections, and water hookups.
Covers drainage setup and checking water levels in the humidifying tray.
Guides on arranging specimens, powering them, and setting up safety devices.
Explains how to configure constant mode settings for temperature and humidity.
Covers starting, running, preventing dew, and ending tests.
Describes features like refrigeration control, time signals, and alarm outputs.
Lists periodic checks like power breaker tests and maintenance tasks.
Details cleaning procedures for condensers, filters, trays, and compartments.
Information on replacing consumable parts like wicks and lamps.
Guides on identifying and remedying problems using alarm codes and tables.
Covers issues not related to self-checks and typical operator mistakes.
Procedures for replacing fuses, lamps, starters, and defrosting the chamber.
Provides comprehensive technical specs for ESL, ESU, ESX, and ESZ models.
Defines technical terms and explains the Espec warranty and service procedure.
To Next Page