Need help?Do you have a question about the ESPEC Platinous ESZ-2C Series and is the answer not in the manual?
General| Brand | ESPEC |
|---|---|
| Model | Platinous ESZ-2C Series |
| Category | Climate chamber |
| Language | English |
Explains the meaning of safety symbols used in the manual.
Provides a guide to understanding the chamber model number designation.
Lists accessories and spare parts included with the chamber.
Lists prohibited explosive, combustible, and ignitable substances.
Explains how to set safety devices to protect specimens during testing.
Provides safety procedures for safely disposing of the chamber.
Outlines important precautions for using the chamber safely.
Advises users to read and comply with warning labels on the chamber.
Provides information on the global warming potential of refrigerants used.
Introduces the Platinous Series chambers and their testing capabilities.
Explains the BTHC system for temperature and humidity control.
Identifies parts of the chamber, including exterior and interior components.
Identifies parts on the front and right side of the chamber.
Identifies parts on the left, rear, and top sides of the chamber.
Describes the test area and its components like shelves and gaskets.
Details components within the test area ceiling, including sensors.
Describes the instrumentation panel and its controls.
Details the operating panel, its keys, and touchscreen elements.
Describes the electrical compartment and its components.
Describes the water circuit compartment and its components.
Covers requirements for selecting an appropriate installation site and space.
Provides instructions for leveling, anchoring, and moving the chamber.
Details primary power supply requirements and connection procedures.
Steps to remove the compressor shipping bracket.
Instructions for connecting cooling water for water-cooled models.
Procedures for setting up the drainage system.
Instructions for checking and adjusting water levels in regulators.
Covers arranging specimens and installing shelves.
How to set overheat protector and high/low limit alarms.
Steps for setting target temperature and humidity in constant mode.
Procedures for starting and ending tests, and preventing dew.
Explains auto/manual refrigeration control and time signals.
Provides lists of checks and maintenance tasks with intervals.
Details procedures for main power switch and overheat protector trip tests.
Covers maintenance tasks like condenser, filter, and tray cleaning.
Lists consumable parts and their recommended replacement intervals.
Explains how to troubleshoot problems indicated by alarm codes.
Addresses common operator errors and issues not covered by self-checks.
Covers user-serviceable tasks like replacing fuses and lamp bulbs.
Provides detailed technical specifications for different chamber series.
Defines terms used throughout the manual.
Details the process for requesting warranty service and parts.
To Next Page