Bench-top type temperature (and humidity) chamber Basic guide Introduction
18 | ESPEC CORP.
Accessories and spare parts
①Shelf
② Cable port rubber
plug
③ Humidifying tray
drain hose
(SH/SU-222, 242,
262,242-5)
(SH/SU-642, 662)
④ Water tank level
sensor
tank drain hose
⑤Connector ⑥Terminal plug
(For external interface)
⑦ Power plug
⑧Wet-bulb wick ⑨Cartridge fuse ⑩Class CC fuse ⑪Breaker handle
cover
⑫Stylus pen ⑬Operation
manual
⑭Warranty card
No. Accessory/Part Use Q’ty.
Check if
included
① Shelf
Holds specimens inside the chamber.
1
②
Cable port rubber
lu
Use to seal the cable port. I.D. 50mm
1