55
INTRODUCTION
Congratulations for choosing this high-quality ESPINA product! We hope it will be
of great help to you. Remember to read the instruction manual before using the
appliance for the first time in order to ensure safe usage. If you have any doubt or
problems, please contact your dealer or the importer. We wish you safe and
pleasant work with this appliance!
SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY AND NOTE THE SAFETY INSTRUCTIONS
AND WARNINGS. USE THE APPLIANCE CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
TO PROPERTY AND/OR SERIOUS PERSONAL INJURY. KEEP THIS INSTRUCTION
MANUAL SAFE FOR FUTURE USE.
- This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
- Make sure that no persons or animals are close to the working area (minimum distance
of 15 m). It is not permitted to either start or use the appliance in the vicinity of persons
or animals.
- Grass being cut and thrown up may contain foreign objects such as stones. You are re-
sponsible for the safety in your working area, and you are liable fordamages to persons
or property.
- Do not use the tool when you are tired or distracted, or your ability to react is impaired
when you are under the influence of alcohol or medication. Inattentiveness may cause
serious injuries.
- Use approved safety goggles. Use approved ear protection. Use high-quality safety
gloves.
- Use high-quality skid-proof protective shoes with safety steel caps. Never operate the
tool wearing sandals, or when barefoot.
- Always wear an approved safety helmet.
- Do not wear loose fitting clothing or jewelry. Wear long trousers to protect your legs. Tie
up long hair. Loose clothing, jewelry, and long hair can get caught in the moving parts.
Wear suitable and durable tight working clothes.
- Keep body parts and clothing away from the cutting tool when you start the engine, or
keep it running.
- Make sure you are standing in a stable and secure position during work. Avoid moving
backwards with the tool due to risk of stumbling.
- Avoid any unnatural posture.
- When the cutting tool has been operated for long hours, it may cause a circulatory dis-
order due to vibration (Raynaud‘s disease). In this case, it is impossible to specify any
length of operation, because it may differ from person to person. The following factors
can have an influence on this phenomenon: Circulatory disorders in the hands of the op-
erator, low outdoor temperatures, long hours of operation. Therefore, it is recommended
to wear warm protective gloves, and to take breaks at regular intervals.
- While cutting on a slope, always stand below the cutting tool.
- Always switch off the tool before you put it down.
EN
To Next Page
Loading...