60
TECHNICAL DATA
Grass trimmer
Cutting circle diameter of line 430 mm
Cutting line diameter 2 x 2,4 mm
Cutting line length 4 m
Weight 7.2 kg
Brush cutter
Cutting circle diameter of blade 255 mm
Cutter blade thickness 1.4 mm
Teeth quantity 3
Weight 7.2 kg
Hedge trimmer
Cutting circle diameter 24 mm
Bar length 406 mm
Cutting length 400 mm
Max. cutting speed 1550 min-1
Weight 7.7 kg
Pole saw
Bar length 305 mm
Cutting length 254 mm
Chain link thickness 1.3
Oil tank capicity 0.125 l
Weight 7.1 kg
Power unit
Displacement 32.6 cm³
Engine output max. 900 W
Fuel tank capacity 0,9 l
Engine type 2-stroke engine, air-cooled
This product fulfils the requirements of quality class HA 2807.
Information on noise emission measured according to relevant standards:
Sound pressure LpA = 94 dB(A)
Sound power LWA = 114 dB(A)
Uncertainty KPA = 3 dB(A)
Wear ear-muffs. The impact of noise can cause damage to hearing.
Vibration Ahv = 5,0 m/s2
Uncertainty KPA = 1,5 m/s2
Reduce noise generation and vibration to a minimum!
- Use only equipment that is in perfect condition.
- Maintain and clean the equipment regularly.
- Adopt your way of working to the equipment.
- Do not overload the equipment.
- Have the equipment checked if necessary.
- Switch off the equipment when not in use.
- Wear gloves.
To Next Page
Loading...