Enter the Sensor Monitor screen and tap ON/OFF button to enable/ disable radar monitoring feature.
When the radar enables switch is set to ON , a red body icon will be shown if a person is detected in front
of the device, and the icon will turn gray if no person is detected within 2 minutes.
IR Learning
Below the temperature and humidity data and radar functions is the infrared learning module. Currently,
this module can only learn the ON/OFF function of a remote controller. Please follow the interface
instructions to iteratively learn the ON/OFF command of your remote controller a total of four times. The
interface upon successful learning will appear as follows:
13
To Next Page
Loading...
