Perform an ON/OFF test on your air conditioner by pointing the ESP32-S3-BOX-3-SENSOR towards it. If
you find that the logic of the air conditioner's ON/OFF function is opposite to your expectations, please
click the Reversal button below to correct it. Of course, you can also click on Relearn to learn other
remote controllers.
Tips:
Please be aware that when the ESP32-S3-BOX-3 is not mounted to the ESP32-S3-BOX-3-SENSOR
dock, the entire Sensor Monitor function will not be operational.
During the period of experiencing the built-in firmware with ESP32-S3-BOX-3-DOCK, avoid hot-
plugging ESP32-S3-BOX-3-DOCK and switching to ESP32-S3-BOX-3-SENSOR. This action could
result in ESP32-S3-BOX-3-SENSOR not being recognized and functioning properly. To resolve
this, simply power again ESP32-S3-BOX-3-SENSOR to restore normal operation.
Due to the power limitations of the infrared emitter and differences among air conditioner brands,
the effective control range for the IR learning feature has been tested to be between 1 to 1.5
meters.
Offline Voice Assistant
14
To Next Page
Loading...
Need help?
General
