ESP32-DevKitM-1
This user guide will help you get started with ESP32-DevKitM-1 and will also provide
more in-depth information.
ESP32-DevKitM-1 is an ESP32-MINI-1(1U)-based development board produced by
Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy
interfacing. Users can either connect peripherals with jumper wires or mount ESP32-
DevKitM-1 on a breadboard.
The document consists of the following major sections:
• Getting started: Provides an overview of the ESP32-DevKitM-1 and
hardware/software setup instructions to get started.
• Hardware reference: Provides more detailed information about the ESP32-
DevKitM-1’s hardware.
• Related Documents: Gives links to related documentaiton.
Getting Started
This section describes how to get started with ESP32-DevKitM-1. It begins with a few
introductory sections about the ESP32-DevKitM-1, then Section Start Application
Development provides instructions on how to do the initial hardware setup and then
how to flash firmware onto the ESP32-DevKitM-1.
To Next Page
Need help?
General
