ESP32-DevKitM-1
Power Source Select
There are three mutually exclusive ways to provide power to the board:
• Micro USB port, default power supply
• 5V and GND header pins
• 3V3 and GND header pins
Warning
• The power supply must be provided using one and only one of the options
above, otherwise the board and/or the power supply source can be damaged.
• Power supply by micro USB port is recommended.
Pin Descriptions
The table below provides the Name and Function of pins on both sides of the board. For
peripheral pin configurations, please refer to ESP32 Datasheet.
To Next Page
Loading...
