III. MODE SELECTION
The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode,
the appliance helps to save more energy. In speed mode, the user can make their coffee faster than
in default setting.
Yes No Yes
Auto shut off time 10mins 30mins 20mins
Cup Volume memory Yes Yes Yes
*Note: The pre-brewing function moistens the grounded beans in the brewer with a small amount of
water before full extraction. This expands the coffee grounds to build up a greater pressure in the
brewer which help extraction of all the oils and full flavor from the grounded beans.
1. When the machine is in standby condition, press and holds the
for 5 seconds.
2. The
will then be flashing and the following button will have the following indications
3. for different settings:
4. Press the hot water button for ECO mode, strong espresso button for speed mode and mild
espresso button for default setting. Two Beep sound will be heard indicates that the mode is
being selected. (Note: If you are pressing the relative lights on button for each mode, the
machine will not response).
5. If you would like to remain the setting unchanged, press
again or wait for 5 seconds for the
machine to return to the standby condition.
E. CLEANING & MAINTENANCE
I. SELF-CLEANING
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The
appliance will remain in the best condition if this function is performed at least once a month or
more regularly depending on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Adding one pack of cleaning agent included in the box to the water tank.
IMPORTANT: Do not use vinegar or other cleaning agent to do self-cleaning of this appliance.
The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficient
large container under the coffee spout.
To Next Page
Loading...
